Microsoft
Software
Hardware
Network
Question : EtherChannel on Cisco 2960 switch intermittent dropped packet
I have a IBM BladeCenter BNT Virtual Fabric switch and has configured 2 ports to trunk to a Cisco 2960 switch. On the 2960, I have enable EtherChannel on the 2 ports and it appears to be working fine.
However, I started to get dropped packets on the EtherChannel- When I do a continuous ping, I get random time outs. When I pull out any one of the cables, the connection stabilizes and I do not have any packet loss. As soon as I have both links in place, packets are dropped again.
On my 2960 -
interface Port-channel 1
switchport mode trunk
!
interface GigabitEthernet0/46
channel-group 1 mode on
!
interface GigabitEthernet0/47
channel-group 1 mode on
!
Answer : EtherChannel on Cisco 2960 switch intermittent dropped packet
report back with the output of these commands please:
show etherch detail
show etherch load-balance
show int trunk
show int gi0/46 status
show int gi0/47 status
show int gi0/46
show int gi0/47
Billy
Random Solutions
DIV issues in IE
Problem with iste-tio-site-VPN (Using Concentrator and 1801 router)
Error: The URI you submitted has disallowed characters. Using Apache and Code Igniter
how to create line jumps in Microsoft Visio 2007
Should I give all disk space during the installation of Win2K8 R2?
Forgot password on 3Com 3300 XM & MM Switch
DataGridView add need a string to show up as two seperate lines in the same cell
Redirecting an IP address in DNs
is there any vb6 and ms c++ 6.0 reflector for exe file to retrieve my deleted source?
Perl - capture error from output