Microsoft
Software
Hardware
Network
Question : EtherChannel on Cisco 2960 switch intermittent dropped packet
I have a IBM BladeCenter BNT Virtual Fabric switch and has configured 2 ports to trunk to a Cisco 2960 switch. On the 2960, I have enable EtherChannel on the 2 ports and it appears to be working fine.
However, I started to get dropped packets on the EtherChannel- When I do a continuous ping, I get random time outs. When I pull out any one of the cables, the connection stabilizes and I do not have any packet loss. As soon as I have both links in place, packets are dropped again.
On my 2960 -
interface Port-channel 1
switchport mode trunk
!
interface GigabitEthernet0/46
channel-group 1 mode on
!
interface GigabitEthernet0/47
channel-group 1 mode on
!
Answer : EtherChannel on Cisco 2960 switch intermittent dropped packet
report back with the output of these commands please:
show etherch detail
show etherch load-balance
show int trunk
show int gi0/46 status
show int gi0/47 status
show int gi0/46
show int gi0/47
Billy
Random Solutions
Using jquery to hide dynamically added divs
XCOPY or COPY help
How to show Inbox Time column?
Query data then take that into an Array to do another select for data
When in ASP.NET might you use a User Control? A Custom Control?
Exchange 2010 - Multiple Email Address Policies
WScript: Retry on HTTP GET Connection Timeout
RPG Socket Program Hanging on Connect()
Keyboard Not Working
Excel / VBA / Userform