Question : Cisco Supervisor IV ws-x4515 Configuration Issue

Hello,

I am not sure if I actually have a problem. But I think I do.

I have a cisco supervisor IV ws-x4515 blade in a 4503 chassis just to give you the lay of the land.

I am having a issue but I am not sure if this issue is something I am doing wrong or missing something.

I am trying to enable "ip routing" however I issue the command and it appears to not show in the running config. Seems like it accepts it but not actually engaging. I do not have the switch in the final location but I need to make sure it is working correctly.

I have been doing some reading and it seems IOS is important.

Could someone please tell me if they have experienced this and what might be wrong.

IOS = "cat4500-entservicesk9-mz.122-44.SG.bin
12.2.(44) SG

If anyone could provide me some insight to my issue I would appreciate it.

Also I have a default route and vlans configured.

Thanks

Answer : Cisco Supervisor IV ws-x4515 Configuration Issue

Here is one ,NET version

http://nspeex.codeplex.com/

One of the simplest encodings are the Alaw/Mulaw 8bit mono encodings that need only 64kbps of data. Thats the bandwidth needed by simple POTS line and the encodings are used there too. They are optimized for voice and therefore music and other sounds play badly.

As for codecs, its better if you first make an estimate of the kind of bandwidth that you would like to dedicate to a voice channel. There are many codecs out there ranging from those that do heavy compression and others that keep the quality intact and therefore less compression.