Question : Install RAID driver during CentOS5.4 install fails

Say, system is an HP ML110 G5 server and RAID 1 configured.
I can see it under fdisk -l as sdc

The RAID driver available on HP is for this kernel:
List of supported kernels:

2.6.18-8.el5 - Red Hat Enterprise Linux 5 (x86)
2.6.18-53.el5 - Red Hat Enterprise Linux 5 Update 1 (x86)

My kernal is:
Linux localhost 2.6.18-164.el5 #1 SMP Thu Sep 3 03:33:56 EDT 2009 i686 i686 i386 GNU/Linux

Should it work?

I followed instructions as per below using the driver but get error that driver failed to load:
I can also download the rpm driver but how will this help me?
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3577708&swItem=MTX-dfebb47310c248b0b65fe31d42&mode=4&idx=2


This was posted on Centos website, it is for centos4, but should still work for centos 5
::::::::::::::::::::::::::::::::::::::::::::::::::::
Preinstalled first:
- download preinstalled driverdisk at hp support&driver website
file called HP Embedded SATA RAID Controller Driver Diskette for Red Hat Enterprise Linux 4 (x86)
download the file : adpahci-1.2.5571-1.rhel4.i686.dd.gz and save into your drive
- extract that file using winzip/winrar, and copy extracted file "adpahci-1.2.5571-1.rhel4.i686.dd"
into your flashdisk (usb removable)
Make sure you have file "adpahci-1.2.5571-1.rhel4.i686.dd" in your flashdisk
- Set BIOS to enable RAID on SATA Enhance and make sure firs boot is CDRom
- After AHCI Raid Utility appears, Set Raid Array by press F8 and build your own Raid0 or Raid1
(i am using raid1 for mirroring data), and finally build can take a several minutes/hour.
Installing CentOS 4.4 Server CD:
- Plug your flashdisk/usb stick to server usb front
- Boot from CentOS server CD
- When boot promt appears type "linux dd"
- After prompt, Choose from "sda" and "/sda/sda1"
- The file in your usb sticks looks like file "adpahci-1.2.5571-1.rhel4.i686.dd" and enter
- OK now I have load module from that file.
- Now, my Raid1 is detected as one drive as mirror disk.
- Continue installing CentOS with your draw.

Answer : Install RAID driver during CentOS5.4 install fails

Well Malwarebyte is very good software and most of us here on expert exchange do recommend it to the people who reports issues related to the virus, worm or malware.

So I think you are good to go and could simply do what malwarebytes asked you to do. Do remove.

Sudeep