Question : VPN between SSG 20 and RVO42 does not come up. "ERROR: Peer did not send a proxy id"

Hi I am trying to build a site to site VPN between a Juniper SSG20 firewall and a linksys RVO42.
I have configured it to be a route based VPN on the juniper side and also manually set the proxy ID. The tunnel still wont come up. looks like phase 1 completes but  Phase 2 negotiations failed because the peer did not send a proxy id. here are the log entries:

Date             Time        Module Level  Type Description
2010-05-26 14:04:05  system info  00536 IKE xxx.xxx.3.186 Phase 2 msg ID e293d7fb:    Negotiations have failed.
2010-05-26 14:04:05 system info  00536 Rejected an IKE packet on ethernet0/0
                                       from xxx.xxx.3.186:500 to xxx.xxx.71.164:
                                       500 with cookies 4ebb0fcec045d90c and
                                       623c3dc2763ba521 because The peer did
                                       not send a proxy ID.
2010-05-26 14:04:05 system info  00536 IKE xxx.xxx.3.186 Phase 2 msg ID
                                       e293d7fb: Responded to the peer's
                                       first message.
 
Iam new to Juniper, Any help would be greatly appreciated.
Thanks!

Answer : VPN between SSG 20 and RVO42 does not come up. "ERROR: Peer did not send a proxy id"

The RV042 needs to send a Proxy ID, it is required by the Juniper. Most likely this is done by setting up the according Firewall Rule; the addresses used there will probably used for building the Proxy ID.