Question : How do I recognize what CatOS version there is on my Ciscoproduct?

Ive encounterd quite a few products today containing CatOS and not IOS but where is the startup process can i see what version of CatOS is running?

Or is it a command I execute in the command prompt?

This is my full startuplog:

1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
110:
111:
112:

0:00.579519: Please set IPAddr variable
0:00.580201: Please set Netmask variable
0:00.580643: Please set Broadcast variable
0:00.581093: No gateway has been specified
0:00.581699: Network is not configured
WS-X4013 bootrom version 5.4(1), built on 2000.02.17 18:28:09
H/W Revisions:    Crumb: 5    Rancor: 8    Board: 2
Supervisor MAC addresses: 00:05:5e:85:83:00 through 00:05:5e:85:86:ff (1024 addr
esses)
Installed memory: 64 MB
Testing LEDs.... done!
The system will autoboot in 5 seconds.
Type control-C to prevent autobooting.
rommon 1 >
The system will now begin autobooting.
Autobooting image: "bootflash:cat4000.6-1-1.bin"
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC##############################
Starting Off-line Diagnostics
Mapping in TempFs
Board type is WS-X4013
DiagBootMode value is "post"
Telling ApkPageMan that we have 12288 pages of memory
Loading diagnostics...

Power-on-self-test for Module 1:  WS-X4013
Status: (. = Pass, F = Fail)
uplink port 1: .       uplink port 2: .       eobc port: .
processor: .           cpu sdram: .           rtc: .
eprom: .               nvram: .               flash: .
temperature sensor: .  enet console port: .   switch 0 port 0: .
switch 0 port 1: .     switch 0 port 2: .     switch 0 port 3: .
switch 0 port 4: .     switch 0 port 5: .     switch 0 port 6: .
switch 0 port 7: .     switch 0 port 8: .     switch 0 port 9: .
switch 0 port 10: .    switch 0 port 11: .    switch 0 registers: .
switch 0 sram: .       switch 1 port 0: .     switch 1 port 1: .
switch 1 port 2: .     switch 1 port 3: .     switch 1 port 4: .
switch 1 port 5: .     switch 1 port 6: .     switch 1 port 7: .
switch 1 port 8: .     switch 1 port 9: .     switch 1 port 10: .
switch 1 port 11: .    switch 1 registers: .  switch 1 sram: .
switch 2 port 0: .     switch 2 port 1: .     switch 2 port 2: .
switch 2 port 3: .     switch 2 port 4: .     switch 2 port 5: .
switch 2 port 6: .     switch 2 port 7: .     switch 2 port 8: .
switch 2 port 9: .     switch 2 port 10: .    switch 2 port 11: .
switch 2 registers: .  switch 2 sram: .
Module 1 Passed

Power-on-self-test for Module 2:  WS-X4148-RJ
Port status: (. = Pass, F = Fail)
 1: .   2: .   3: .   4: .   5: .   6: .   7: .   8: .
 9: .  10: .  11: .  12: .  13: .  14: .  15: .  16: .
17: .  18: .  19: .  20: .  21: .  22: .  23: .  24: .
25: .  26: .  27: .  28: .  29: .  30: .  31: .  32: .
33: .  34: .  35: .  36: .  37: .  38: .  39: .  40: .
41: .  42: .  43: .  44: .  45: .  46: .  47: .  48: .
Module 2 Passed

Power-on-self-test for Module 3:  WS-X4148-RJ
Port status: (. = Pass, F = Fail)
 1: .   2: .   3: .   4: .   5: .   6: .   7: .   8: .
 9: .  10: .  11: .  12: .  13: .  14: .  15: .  16: .
17: .  18: .  19: .  20: .  21: .  22: .  23: .  24: .
25: .  26: .  27: .  28: .  29: .  30: .  31: .  32: .
33: .  34: .  35: .  36: .  37: .  38: .  39: .  40: .
41: .  42: .  43: .  44: .  45: .  46: .  47: .  48: .
Module 3 Passed

Power-on-self-test for Module 4:  WS-X4148-RJ
Port status: (. = Pass, F = Fail)
 1: .   2: .   3: .   4: .   5: .   6: .   7: .   8: .
 9: .  10: .  11: .  12: .  13: .  14: .  15: .  16: .
17: .  18: .  19: .  20: .  21: .  22: .  23: .  24: .
25: .  26: .  27: .  28: .  29: .  30: .  31: .  32: .
33: .  34: .  35: .  36: .  37: .  38: .  39: .  40: .
41: .  42: .  43: .  44: .  45: .  46: .  47: .  48: .
Module 4 Passed

Power-on-self-test for Module 5:  WS-X4148-RJ
Port status: (. = Pass, F = Fail)
 1: .   2: .   3: .   4: .   5: .   6: .   7: .   8: .
 9: .  10: .  11: .  12: .  13: .  14: .  15: .  16: .
17: .  18: .  19: .  20: .  21: .  22: .  23: .  24: .
25: .  26: .  27: .  28: .  29: .  30: .  31: .  32: .
33: .  34: .  35: .  36: .  37: .  38: .  39: .  40: .
41: .  42: .  43: .  44: .  45: .  46: .  47: .  48: .
Module 5 Passed

Power-on-self-test for Module 6:  not present
Port status: (. = Pass, F = Fail)

Module 6 Ignored

Exiting Off-line Diagnostics

IP address for Catalyst not configured
DHCP/BOOTP will commence after the ports are online
Ports are coming online ...


Cisco Systems, Inc. Console




Enter password:
2010 Jul 09 11:40:00 %SYS-5-MOD_OK:Module 1 is online
2010 Jul 09 11:40:12 %SYS-5-MOD_OK:Module 2 is online
2010 Jul 09 11:40:12 %SYS-5-MOD_OK:Module 3 is online
2010 Jul 09 11:40:12 %SYS-5-MOD_OK:Module 5 is online
2010 Jul 09 11:40:12 %SYS-5-MOD_OK:Module 4 is online

Console>


I run it on HyperTerminal with XPP

Answer : How do I recognize what CatOS version there is on my Ciscoproduct?

More specifically, you need:
http://uk3.php.net/manual/en/function.ftp-connect.php (to connect to the server)
http://uk3.php.net/manual/en/function.ftp-nlist.php (to get a list of files)
http://uk3.php.net/manual/en/function.ftp-get.php (to retrieve a file)
Random Solutions  
 
programming4us programming4us