Question : how to configure MWI on General Delivery Mailbox on uc500?

Hello
I'm trying to configure a MWI for General Delivery mailbox on a uc520 if possible.
I read that this can be done but am not very clear on how to do this. Thanks


Here is my configuration for my GDM:
!
dial-peer voice 1007 voip
 description [-[ General Delivery Mailbox ]-]
 destination-pattern 1007
 session protocol sipv2
 session target ipv4:10.1.10.1
 dtmf-relay sip-notify
 codec g711ulaw
 no vad
!
ephone-dn  1  dual-line
 number 1001 no-reg primary
 label MarcS-x1001
 name Marc Sauve
 call-forward busy 1999
 call-forward noan 1999 timeout 10
 translation-profile incoming no-prefix
!
!
ephone-dn  3  dual-line
 number 1003 no-reg primary     ****This extension should light up if message in GDM if possible.
 label Operator-x1003
 description Operator
 name Sylvie Bombardier
 call-forward busy 1999
 call-forward noan 1999 timeout 10
 translation-profile incoming no-prefix
!
ephone-dn  8  dual-line
 number 1007 no-reg both
 label GeneralMail- x1007
 description General Mail
 name General Mailbox
 call-forward busy 1999
 call-forward noan 1999 timeout 3
 hold-alert 30 originator

!
ephone  1   ***This phone also has the shared extension 1007 for GDM
 device-security-mode none
 mac-address 0017.E0AE.51C1
 username "msauve" password cisco
 type 7961
 button  1:1 2:2 3:3 4:4
 button  5:5 6:8
!
!
ephone  4          ***This phone also has the shared extension 1007 for GDM                      
 device-security-mode none
 mac-address 0018.19B9.35BE
 username "operator" password 1234
 codec g729r8
 type 7961
 button  1:3 2:5 3:8


Any chance someone can have a look and help me out with this? I think I have to configure a huntgroup but am not sure how or if i'm on the right track.

Thanks very much for the help.

Answer : how to configure MWI on General Delivery Mailbox on uc500?

Here is a more detailed exchange that might help you
https://supportforums.cisco.com/message/3091135?tstart=0