Microsoft
Software
Hardware
Network
Question : Speedtouch static ip address to a cisco 506 pix
Hi
I am trying to configure a speedtouch 546 idsn for static ip addresses in the setup of the speedtouch I go to custom setup and entre the IP address of the router **.131.250.14 and the network address of **.131,250.8 with a subnet mask of 255.255.255.248 which gives me the 5 IP addresses I have been given by the ISP provider, my problem lies in: I want the pix to use the IP address of **.131.250.9 and from the Pix I can ping this address, the speedtouch internal ip address is the default 192.168.1.254 how do I assign the **.131.250.9 in the speedtouch setup to give that ip address to the Pix
thank you in advance for any help
Answer : Speedtouch static ip address to a cisco 506 pix
Hi,
You need to set to Bridge mode the modem!
And you need to set the PIX to pppoe mode:
http://www.cisco.com/en/US
/products/
hw/vpndevc
/ps2030/
pr
oducts_con
figuration
_example09
186a008010
55dd.shtml
Random Solutions
Convert chinese caracters
Dell desktop will not boot
Voltage sensor detected a failure on DELL PowerEdge 2650 server
Wyse thin client and Citrix display/graphic lag
Unknown USB Device
I need to stop, then re-start, a thread in a web service using IIS
DOS Bat File Copy a File with Date Timestamp
Adding URL Parameter
access to css 11503 using GUI
Disabling software restriction policy