Good Day,
I have a 851W Cisco and it was working great as a wired Router. It was doing DHCP, Gateway, Firewall and other services with no issue.
I use PPTP and RDP through the Cisco to other computers with no problem.
I decided I wanted to enable the Wi Fi part of the Cisco, and when I did, all of a sudden I could no longer use PPTP to a Server on the net. If I use a different Router, there is no problem, so the issue is with the Cisco when I telneted into it to program it.
Here are the commands I used:
Int dot0
Encryption vlan 1 mode ciphers tkip
Ssid %%Name of Network here%%
Vlan 1
Authentication open
Authentication key-management wpa
Guest-mode
Wpa-psk ascii %%PASSWORD%%
Channel %%CHOOSE A CHANNEL 1-11%%
No cdp enable
No dot11 extension aironet
Bridge irb
Int dot11radio0.1
Encapsulation dot1q 1 native
Bridge-group 1
Exit
Int vlan1
Bridge-group 1
Exit
Is there an obvious issue? I think the computer trying to establish the pptp tunnel has a 690 error code. It's not a PIX, though I have it in the Cisco PIX zone.
|
