Microsoft
Software
Hardware
Network
Question : COMPAQ V6000 HP, WON'T BOOT WITH BATTERY INSERTED, DC BLUE LIGHT PULSES DIM
I'm A+, MCSA and run a small pc shop. Familiar with most HP issues including the recalls. Heres what I got:
1. V6000
2. BOOTS WITH AC ADAPTER POWER
3. DC LIGHT STAYS SOLID WHEN AC PLUGGED IN
4. DC LIGHT DIMS AND BRIGHTENS WHEN ANY BATTERY PLUGGED IN (TRIED 3 DIFFERENT ONES)
5. CHARGE LIGHT BLINKS TWICE WHEN POWER BUTTON IS PUSHED, SYSTEM DOES NOT BOOT, NO VIDEO LIGHTS ETC.
6. TAKE BATTERY OUT, START SYSTEM, SYSTEM BOOTS, PLUG IN BATTERY, AFTER A FEW MOMENTS SYSTEMS HARD POWER DOWNS.
7. WHILE SYSTEM RUNNING WITHOUT BATTERY IN, I MOVE THE CORD IN MULTIPLE DIRECTIONS, SYSTEM DOES NOT SHUT DOWN DUE TO POWER LOSS, ELMINIATING A LOOSE DC JACK....
8. TAKE BATTERY OUT, TAKE OUT AC ADAPTER, HOLD POWER BUTTON FOR 20 SECONDS, SAME ISSUE
9. WRITE ON HERE FOR ASSISTANCE
Answer : COMPAQ V6000 HP, WON'T BOOT WITH BATTERY INSERTED, DC BLUE LIGHT PULSES DIM
Which, again, means that the motherboard is shorting out between itself and the battery. This is a power issue most likely fixed by replacing the system board.
Random Solutions
jQuery AJAX over SSL
Unable to answer inbound calls - Asterisk PBX - Polycom 330
Subform Recordset problems
How do I view taks manager in DOS from a remote PC
Blackberry Tour not always staying in sync with Exchange.
critical drive was mirrored and data was lost
Web browser history tool
reset Exchange 2007, HELP
Exchange Replication
C# to VB.NET