Question : Problem connecting Netapp FCP LUN on SERVER 2008

I'm trying to connect lun over fibrechannel (trough Emulex LPE 1105 HBA)
If I use Emulexes HBANYWHERE I don't see any other devices than port 1 and 2 from this HBA.
Operating system is server 2008 enterprise
Hardware HP Blade server BL460c G6
Fibrechanel switches from Brocade
NetApp storage 3200

What do I have to do to see LUN on Netapp that is presented to this controllers wwns via FCP initiator group.

Best regards
Marko

Answer : Problem connecting Netapp FCP LUN on SERVER 2008

I have resolved this issue.
The problem was in brocade switches.
Zoning change was configured OK, but it wasn't operational even after "apply" and restart of the switch.
I had to upgrade firmware on switches then it worked OK.

So thank you for all help.
Best regards
Marko