Microsoft
Software
Hardware
Network
Question : SUP7203B PFC incompatibility
I have a customer with a SUP720-3b that works fine on its own, but when another SUP720-3b is inserted into the chassis we get the following feedback...
Router#
*Apr 18 06:57:37.115: %PFREDUN-SP-4-PFC_MISMATCH
: My PFC EARL7-XL and Other's PFC EARL7-XL-LITE mismatch
*Apr 18 06:57:43.703: %PFREDUN-SP-6-ACTIVE: Standby processor removed or reloaded, changing to Simplex mode
*Apr 18 06:57:43.739: cwan_cwpa_loki_peer_presen
t_activeli
nks_sync_e
vent: peer is not present
*Apr 18 06:57:43.703: %OIR-SP-3-PWRCYCLE: Card in module 5, is being power-cycled (Module reset)
Router#
Router#show mod
Mod Ports Card Type Model Serial No.
--- ----- --------------------------
----------
-- ------------------ -----------
2 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAB091302MU
4 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAB0921073H
5 0 Supervisor-Other Unknown Unknown
6 2 Supervisor Engine 720 (Active) WS-SUP720-BASE SAD070502TB
Mod MAC addresses Hw Fw Sw Status
--- --------------------------
-------- ------ ------------ ------------ -------
2 0013.60a3.4a80 to 0013.60a3.4abf 2.0 12.2(33)SRD4 12.2(33)SRD4 Ok
4 0013.c458.bf80 to 0013.c458.bfbf 2.0 12.2(33)SRD4 12.2(33)SRD4 Ok
5 0000.0000.0000 to 0000.0000.0000 0.0 Unknown Unknown Unknown
6 0005.9a3b.d9e4 to 0005.9a3b.d9e7 0.902 8.5(3) 12.2(33)SRD4 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------
- ------------------ ----------- ------- -------
6 Policy Feature Card 3 WS-F6K-PFC3B SAD072203CN 0.105 Ok
6 MSFC3 Daughterboard WS-SUP720 SAD070500YM 0.801 Ok
Mod Online Diag Status
---- -------------------
2 Pass
4 Pass
5 Not Applicable
6 Pass
Router#
I looked up the message on Cisco.com and it said
"This message indicates that the active supervisor engine and the redundant supervisor engine have different versions of the PFC daughter card"
Here is a capture of the other SUP720 that shows it also has a PFC3B...
lab-2-1#
000103: *Jun 17 17:24:24.099 CST: %PFREDUN-SP-4-PFC_MISMATCH
: My PFC EARL7-XL-LITE and Other's PFC EARL7-XL mismatch
lab-2-1#
000104: *Jun 17 17:24:30.518 CST: %PFREDUN-SP-6-ACTIVE: Standby processor removed or reloaded, changing to Simplex mode
lab-2-1#
000105: *Jun 17 17:24:30.554 CST: cwan_cwpa_loki_peer_presen
t_activeli
nks_sync_e
vent: peer is not present
lab-2-1#
000106: *Jun 17 17:24:30.518 CST: %OIR-SP-3-PWRCYCLE: Card in module 6, is being power-cycled (Module reset)
lab-2-1#show mod
Mod Ports Card Type Model Serial No.
--- ----- --------------------------
----------
-- ------------------ -----------
2 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAB091302MU
4 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAB0921073H
5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL1016K8U0
6 0 Supervisor-Other Unknown Unknown
Mod MAC addresses Hw Fw Sw Status
--- --------------------------
-------- ------ ------------ ------------ -------
2 0013.60a3.4a80 to 0013.60a3.4abf 2.0 12.2(33)SRD4 12.2(33)SRD4 Ok
4 0013.c458.bf80 to 0013.c458.bfbf 2.0 12.2(33)SRD4 12.2(33)SRD4 Ok
5 0016.9df6.6ba0 to 0016.9df6.6ba3 5.2 8.5(3) 12.2(33)SRD4 Ok
6 0000.0000.0000 to 0000.0000.0000 0.0 Unknown Unknown Unknown
Mod Sub-Module Model Serial Hw Status
---- --------------------------
- ------------------ ----------- ------- -------
5 Policy Feature Card 3 WS-F6K-PFC3B SAL1016KAYK 2.3 Ok
5 MSFC3 Daughterboard WS-SUP720 SAL1016K9E0 2.5 Ok
Mod Online Diag Status
---- -------------------
2 Pass
4 Pass
Does anyone know why we get these errors? Is there an easy resolution without having to swap out hardware? Any help is appreciated.
Thanks
Answer : SUP7203B PFC incompatibility
One of your PFC is EARL7-XL-LITE and Other is PFC EARL7-XL. For failover to work, they need to exactly match. It is not a software version issue. I am afraid you need to replace hardware.
Random Solutions
Error occurred while creating the transfer set
site review
windows cannot access the specified drive, path, or file. You may not have the appropriate permissions to access the item
How to solve SQL Server 2008 R2 error, cannot connect to SQLSERVER error 53
cfapplication sessionTimeout question
Search to details ..From details tp search i should get the screen as earlier as
Hosting multiple web sites on one physical server
How do I set a form to open when Access 2007 and/or 2010 opens a data base?
How to use C# code in a VB.NET project
Server Local Group to Domain Local Group